Downloads

Download SP Flash Tool (SmartPhone Flash Tool)

SP Flash Tool

SmartPhone Flash Tool (SP Flash Tool) is the windows based programming in which you can install any Android Stock Rom or any Custom ROM, custom Recovery, fixing of the hard bricked device of any Android SmartPhone. SP Flash Tool will bolster any Android Phone brand which has inbuilt Mediatek (MTK) chipset in it.

SmartPhone Flash Tool Features:

Flash Stock Rom

Any MTK based smartphone to overhaul or minimization of your Android Device with only hardly any snaps.

Flash Recovery

Enables you to flash a custom recovery on MTK based smartphone by basically including the disperse file and find recovery.img file and flash it.

Memory Test

Verify the RAM on outer memory and NAND Flash.

Parameter Setting

It enables users to peruse and compose the parameter like peruse and compose the capacities information on the device for one-time programming (OTP).

Organization Device/Hard Reset

Enables users to Format their Android Device by essentially stacking the disperse file and Connecting your Android Smartphone to Computer and snap-on Format Button.

Downloads:

How to Use SP Flash Tool:

An application that is given and created by MediaTek organization to improve the presentation of their processors. Meditek is a world popular IC originator for smartphones, tablets, shopper products and some more.

Flash Stock ROM:

  1. Download the Tool and extract it
  2. Download Stock Firmware you wish to flash and concentrate it
  3. Switch off your device
  4. Now click “Flash_exe” to dispatch the Sp Flash Tool
  5. Click download tab and click the scatter-loading button to stack disperse file
  6. Disperse file is situated in the firmware file
  7. Click on the “download symbol” to dispatch the flashing procedure
  8. Then connect your device and click volume up or down button to facilitate the PC to perceive the connected device
  9. Sit tight for around 10 minutes, after an effective activity a message will be shown alongside a green circle.

Flash Custom ROM:

  1. Download the applicable Custom ROM for you android MediaTek device
  2. Start your PC in “Device driver signature disabled” mode
  3. Install MediaTek USB-VCOM drivers
  4. Run the tool in “Administrator Mode”
  5. Next, click “Scatter-loading” and load the dissipate file that is situated in the firmware file
  6. Now select the “Download Agent” go to the Sp Flash Tool folder and select “MTK_AllInOne_DA.bin
  7. After the above steps go to the”Format” tab and check the approval
  8. Now switch off your device and connect
  9. Then click start and to organize the device
  10. Next, disconnect the device and click on the download button under the download tab
  11. Again connect the device
  12. Then the custom ROM installation will start and hang tight for around 10 minutes A green tick will appear after effective installation

About the author

Mohsin Raza

Leave a Comment